Vertical press (dual drive) having the following features

Features (requested by the purchaser customer)

Size of working platens 2300 mm x 2500 mm, H 1900 mm. Distance between columns 2154 mm x 1384 mm
Hydraulic system made by 3 cylinder and by a hydraulic control unit including valves.

The hydraulic cylinders have the following characteristics:

	n. 1 cylinder Ø 200 mm bored, with 1200 mm stroke and Maximum operating pressure 200 bar
	n. 2 cylinder Ø 100 mm bored, with 1000 mm stroke and Maximum operating pressure 200 bar.

Press bed Side view

Structure
Cylinder
Control unit
Miscellaneous
Total

Hydraulic control unit for vertical moulding machinery.

The control unit consists of:

Tank ASM150 with TA4080 cap and visual level LVA2AT
Three phase motor 100L4B5 3kW 400/50Hz (7)
Double gears pump A2D13 + P1D3
1 group of cylinder-control solenoid valves NG6 with 2 dual-voice-coil station (4, 5)
2 venting solenoid valves for either home-position or dynamic pressing (3, 12)
Remoted pressure relief valve to set boost pressure cylinder 200mm/120 (6)
Ready for pressure switches or transducers to select pressure of pump protection check valve
Maximum temperature control thermostat (1)
Minimum level control
2 filters on the suction of pumps 90micron
1 return filter (25micron) with clogging indicator (8)
Ready for oil /water heat exchanger system (11)
Pressure gauges unit and front gauge for remote pressure (14, 15)

Oleodynamic cylinders

CDEX200/120X1200+100dist. FA with flanged connections SAE3000 (1)
CDEX100/56X1200. FA with threaded connections (2)

Oleodynamic system

Lateral cylinders flow divider

Item	Q.ty	Description
1	1	Flow gear-divider
2	1	Hydraulic block (manifold)
3	mt	Steel pipes thk.1.5 d.12, working pressure 250 BAR
4	vari	Polypropylene collar C1 12 + Plate
5	3	Pipes squeeze block

Item	Description
1	A Central cylinder
2	B Central cylinder
3	B Lateral cylinder
4	D Drainage lateral cylinders
5	A Lateral cylinder
6	Spare block (manifold)